GPS /GLONASS Signal Re-radiater for Indoor Satellites Signal Reception

◎ Compact size/low cost/high performance
◎ Permanently screw mount
◎ One external re-radiator for multiple, different GPS/GLONASS receivers
◎ Real-time GPS/GLONASS satellites outdoor reception to an indoor environment
◎ Cable length extended as long as 40m RF cable
◎ Up to Re-radiating 30m radius in line-of-sight
型號 : RK-306


Specifications:

Category

Specifications

 General Description

 Professional GPS/GLONASS re-radiating system

 Physical Construction

 Construction: Polycarbonate radome enclosure, cast die at the bottom, sealed   with weatherproof rubber.

 Dimensions: Antenna:80mmin diameter &71.24mmin height
 Ceramic patch re-radiator:79mm(W) x85mm(L) x113mm(H)
 Regulator: 65mm (L) x 32mm (W) x 43mm (H)

 Cable Length: 40m RG-58 A/U

 Standard Connector: Antenna: TNC Jack, re-radiator: SMA Jack

 Weight: Antenna: 245g
 Ceramic patch re-radiator:215g
 Regulator:85g

 Standard Mounting: Stainless bracket mount

 Performance Specification

 External Antenna

 Polarization: R.H.C.P.

 Absolute Gain @ Zenith: +4 dBic typically

 Gain @ 10° Elevation: -5 dBic typically

 General: 1575/1602 MHz (CF:1590 MHz)

 Gain: 27 dB typically

 Bandwidth: 40 MHz @Return Loss -10 dB

 Noise Figure: 1.5 max.

 Axial Ratio: 3 dB max.

 VSWR: 2.0 max.

 Output Impedance: 50 ohm

 Ceramic patch Re-radiator

 Re-radiating Range: 30m

 Electrical Specification

 Supply Voltage: 100~240V AC to 7.5V~12V DC Regulator

 Power Consumption: 48mA (+/- 5%) @ 7.5V DC

 Environmental Specification

 Operating Temperature: –30°C to +80°C

 Storage Temperature: –40°C to +85°C

 Operating Humidity: 95% RH, non-condensing

(*PS: The specification is subject to change without prior notice)






Overview

RK-306 is a complete GPS/GLONASS L1 band signal re-radiating system with dual antennas to re-transmit real-time GPS/GLONASS satellite outdoor reception to an indoor environment. The system kits include a high gain external GPS /GLONASS antenna, a precisely calibrated amplifier circuit with ceramic patch re-radiator, and a built-in power supply regulator. The ceramic patch re-radiator allows multiple GPS/GLONASS receivers perform on-the-fly receiver performance within a closed environment, while the main GPS/GLONASS  antenna is located on an unmanned outdoor location. GPS/GLONASS center frequency is1590MHz. The input signal power at the receiving antenna is approximately -130dBm, so the desire signal is below the thermal noise floor. The whole system is designed as PNP (Plug-and-Play) hardware and it can be installed either temporarily or permanently to a secured location by using whether dashboard suction cup or screws.

Wherever in lab/building/underground garage, RK-306 guarantees to bring and re-radiate GPS/GLONASS signal that meets your requirement.





Features:

  • Compact size/low cost/high performance
  • Permanently screw mount
  • One external re-radiator for multiple, different GPS/GLONASS receivers
  • Real-time GPS/GLONASS satellites outdoor reception to an indoor environment
  • Cable length extended as long as40mRF cable
  • Up to Re-radiating 30m radius in line-of-sight








Applications:
  • GPS /GLONASS Re-Radiating in Labs
  • GPS /GLONASS Re-Radiating in Retail Stores
  • GPS /GLONASS Re-Radiating in Factory Line
  • GPS /GLONASS Re-Radiating in